CF Composits

 Epoxy Resin & Hardeners find extensive use in the production of laminates and composites. When combined with epoxy resin and reinforcing materials like fiberglass or carbon fiber for making in reinoforce. 

• Available Size-250gm
• Old To New Concrete Bonding Exposy Resin 

EPBOND EP is based on solvent free epoxy resins. It is supplied as a two part material in pre weighed quantities for ready onsite mixing and use. The physical properties of the product allow its use in applications requiring resistance to creep and stress relaxation, maintenance of mechanical properties at ambient temperatures and high load bearing strength. Applications include the structural bonding of plastic (fresh) concrete to hardened (existing) concrete; bonding of concrete, masonry, stone. The product bonds to dry, damp and wet surface and act as a bonding agents in non-load and load bearing applications from new to old concrete.

Uses:

• In application for bonding harden concrete to harden concrete and fresh concrete toharden concrete
• In area where extensions of concrete structure is required in all types of high and lowraise building buildings
• It can be used either in internal or in external condition
• Can be used in road ,bridge, factories construction works

Advantages:

• EPBOND EP can be applied by brush i.e. ease in application
• Enables to place the concrete up to gel time of EPBOND EP, without risk of delamination
• Bond strength is more than the tensile strength of good quality concrete
• Acts as a 'barrier coat' to the migration of chloride ions from host concrete
• Exhibits high mechanical strength

We used Araldite Epoxy Resin LY556 and Aradur Hardener HY951 in this study [11]. Because the strength of plastic reinforced composites is dependent on quantity of the reinforcement.
Araldite® LY 556 which has crystallized and looks cloudy can be restored to its original state by heating to 60 - 80 °C. 

 Epoxy hardeners find extensive use in the production of laminates and composites. When combined with epoxy resin and reinforcing materials like fiberglass or carbon fiber.

Mix Well

• UV Light Stable
• Long Term Durablity 
• Scratch Resistant 
• Made In USA

Polyester resin, also known as unsaturated polyester resin (UPR), is a type of thermosetting polymer derived from the reaction between a dibasic acid and a diol.

Unsaturated polyester resin, similar to epoxy resin, is a material that is used, among other things, for the production of various components in model making, but is also used in boat building or in the construction of swimming pools and ponds.

Gelcoat is a type of resin that consists of an epoxy-based polymer system combined with pigments and catalysts. It's applied as a liquid coating that hardens into a smooth, shiny surface when cured. The end result is a glossy finish that's highly resistant to UV radiation, chemicals, solvents, and impact damage. There are two main types of gelcoats: polyester-based and vinylester-based. Polyester-based gelcoats are cheaper but less durable than their vinylester counterparts; however, both types offer superior protection against the elements compared to other coatings such as paint or varnish.